LayR – Multi Timbral Synth

LayR is a massively polyphonic, multi-timbral synthesizer for iPad and iPhone, optimized for modern 64 bit devices delivering up to 256 voices of rich, multi-layered and textured sounds.

LayR’s primary sounds are called Performances: A Performance is a set of Instruments where each instrument is a set of Layers and each Layer is a complete synthesizer. A performance can consist of over 100 instruments each with it’s own MIDI channel and crossfading keyboard span. Voices are assigned to each layer in each instrument until the audio engine runs out of available voices. This means that with normal playing technique it is possible to create extremely complex texture on each note or even to have a single insane monophonic instrument equivalent to 100 synths all playing at once!

Every Layer has a dual oscillator which can morph with modulation between two shapes and phase states, two rich and warm state variable filters and a mixer to blend the oscillator with filters in any serial/parallel combination. For modulation (Frequency, Amplitude and Phase) there are two aux oscillators ranging from DC to audio frequency switchable to optionally follow keyboard pitch and restart phase when a note is started. 2 loopable ADSR envelopes ranging from fractions of a millisecond to 100 seconds, a volume level ADSR and a random level generator with a smoothing filter. With stereo delay, reverb and EQ on the output section LayR excels at not only emulating normal analog synth sounds but also at creating ambient textures with extremely long evolution cycles.

Focused at keyboard players looking for a mobile synth that can be reliably used live on stage it is equally at home in the studio. LayR is provided with an extensive selection of usable instrument and performance presets which can be loaded using MIDI bank select and program change messages in the same manner as hardware synths. There is also an 8 channel arpeggiator with a 16 step event sequencer for creating exciting polyrhythmic patterns. Full IAA and Audiobus compatibility means LayR can be used with hosts and other music apps on iOS.

LayR - Multi Timbral Synthesizer

by Living Memory Software

  • Rating

  • Premiere

    2017-03-07

  • Genre

    Music

  •   $19.99 QR code
  • Platform

    iOS (Universal)

  • Version

    1.0.2 ⋅ 24 MB

  • Additional

    InfoGallery

LayR - Multi Timbral Synthesizer

LayR is a massively polyphonic, multi-timbral synthesizer for iPad and iPhone, optimized for modern 64 bit devices delivering up to 256 voices of rich, multi-layered and textured sounds.

LayR's primary sounds are called Performances: A Performance is a set of Instruments where each instrument is a set of Layers and each Layer is a complete synthesizer. A performance can consist of over 100 instruments each with it’s own MIDI channel and crossfading keyboard span. Voices are assigned to each layer in each instrument until the audio engine runs out of available voices. This means that with normal playing technique it is possible to create extremely complex texture on each note or even to have a single insane monophonic instrument equivalent to 100 synths all playing at once!

Every Layer has a dual oscillator which can morph with modulation between two shapes and phase states, two rich and warm state variable filters and a mixer to blend the oscillator with filters in any serial/parallel combination. For modulation (Frequency, Amplitude and Phase) there are two aux oscillators ranging from DC to audio frequency switchable to optionally follow keyboard pitch and restart phase when a note is started. 2 loopable ADSR envelopes ranging from fractions of a millisecond to 100 seconds, a volume level ADSR and a random level generator with a smoothing filter. With stereo delay, reverb and EQ on the output section LayR excels at not only emulating normal analog synth sounds but also at creating ambient textures with extremely long evolution cycles.

Focused at keyboard players looking for a mobile synth that can be reliably used live on stage it is equally at home in the studio. LayR is provided with an extensive selection of usable instrument and performance presets which can be loaded using MIDI bank select and program change messages in the same manner as hardware synths. There is also an 8 channel arpeggiator with a 16 step event sequencer for creating exciting polyrhythmic patterns. Full IAA and Audiobus compatibility means LayR can be used with hosts and other music apps on iOS.

FEATURES
- Optimised 32 bit Audio Engine.
- Up to 128 Voices ( 256 on iPad Pro ).
- Multi-Timbral with 8 individual stereo instrument outputs + full mix output.
- Multi Channel Arpeggiator with 16 step event sequencer.
- Stereo Delay, Reverb and EQ on output section.
- Ranged MIDI control for all parameters.
- AudioBus and Inter-App Audio compatible.
- Performance and Program preset import & export via iTunes.
- Performance and Program preset sharing via iCloud Drive.
- Built-in Help


LayR is tested as thoroughly as possible and we hope there are no bugs left! If you do find one, rather than writing a negative review because of it, please report it to us either on our forum or by contacting support from our website. We hate bugs too and we're always ready to stamp them out quickly!
www.livingmemorysoftware.com

KORG Gadget 3: MacOS support, 3 new devices inc.Audio Recording, on sale 50% offf

What’s New in Version 3.0.0 • Two new gadgets provide long-awaited audio recording. • “Recife” – A new powerful drum gadget with 16 pads. • Supports music sharing service “Allihoopa”. http://allihoopa.com/ • Supports exporting plug-in…

New Creative Synth App: Seaquence by Okaynokay

https://www.youtube.com/watch?list=UU1gKxrjxxODV0xrkSuT-ayw&v=egiBRg8iLcA Seaquence by Okaynokay Rating Premiere 2017-03-14 Genre Music   FREE QR code Platform iOS (Universal) Version 1.0.2 ⋅ 11 MB Additional Info ⋅ Gallery Seaquence Seaquence — Make living music! Seaquence is a unique...

Leave a Reply

Your email address will not be published. Required fields are marked *