LayR is a massively polyphonic, multi-timbral synthesizer for iPad and iPhone, optimized for modern 64 bit devices delivering up to 256 voices of rich, multi-layered and textured sounds.
LayR’s primary sounds are called Performances: A Performance is a set of Instruments where each instrument is a set of Layers and each Layer is a complete synthesizer. A performance can consist of over 100 instruments each with it’s own MIDI channel and crossfading keyboard span. Voices are assigned to each layer in each instrument until the audio engine runs out of available voices. This means that with normal playing technique it is possible to create extremely complex texture on each note or even to have a single insane monophonic instrument equivalent to 100 synths all playing at once!
Every Layer has a dual oscillator which can morph with modulation between two shapes and phase states, two rich and warm state variable filters and a mixer to blend the oscillator with filters in any serial/parallel combination. For modulation (Frequency, Amplitude and Phase) there are two aux oscillators ranging from DC to audio frequency switchable to optionally follow keyboard pitch and restart phase when a note is started. 2 loopable ADSR envelopes ranging from fractions of a millisecond to 100 seconds, a volume level ADSR and a random level generator with a smoothing filter. With stereo delay, reverb and EQ on the output section LayR excels at not only emulating normal analog synth sounds but also at creating ambient textures with extremely long evolution cycles.
Focused at keyboard players looking for a mobile synth that can be reliably used live on stage it is equally at home in the studio. LayR is provided with an extensive selection of usable instrument and performance presets which can be loaded using MIDI bank select and program change messages in the same manner as hardware synths. There is also an 8 channel arpeggiator with a 16 step event sequencer for creating exciting polyrhythmic patterns. Full IAA and Audiobus compatibility means LayR can be used with hosts and other music apps on iOS.
https://www.youtube.com/watch?v=LiEPZMxu_sA
LayR-Multi Timbral Synthesizer
by Living Memory Software
-
Rating
- $19.99
-
Platform
iOS (Universal)
LayR-Multi Timbral Synthesizer
LayR is a massively polyphonic, multi-timbral synthesizer for iOS devices, optimized for modern 64 bit CPUs and capable of delivering up to 256 voices of rich, multi-layered and textured sounds.
LayR's primary sound components are called Performances where a Performance is a set of Instruments and each Instrument is a set of Layers and each Layer is a complete synthesizer. A performance can consist of any number of instruments each with its own MIDI channel and crossfading keyboard span. Each Instrument can consist of any number of Layers to a maximum of 128.
Each Layer has a dual oscillator that can morph with modulation between two shapes and phase states, two rich and warm state variable filters, a wave folder and a mixing section to blend oscillators and filters in any serial/parallel combination.
For modulation (frequency, amplitude and phase) there are two Low Frequency Oscillators ranging from DC to audio frequency switchable to optionally follow keyboard pitch and restart phase when a note is started. Two loopable ADSR envelopes ranging from fractions of a second to over 100 seconds, an amplitude ADSR and a random number generator with a smoothing filter. With stereo delay, reverb and EQ on the output section LayR excels at not only emulating normal analog synth sounds but also at creating massive pads and huge spacy ambient textures with extremely long evolution cycles.
Focused at keyboard players looking for a mobile synth that can be reliably used live on stage LayR is equally at home in the studio. An extensive selection of usable instrument and performance presets are included which can be loaded using MIDI bank select and program change messages in the same manner as hardware synths.
LayR sports almost unparalled and extremely flexible MIDI control. Every parameter in the synth engine can be assigned to any MIDI Control Change number and parameters spread across multiple Layers can be grouped and controlled by a single MIDI cc with assignable range and direction.
There is also an 8 track, 16 step Arpeggio Sequencer which can be used to create all sorts of exciting polyrhythmic looped patterns or even ambient generative music. Each track can have it's own speed, playback mode and length.
On top of all that LayR has a MIDI Controller Mixer that can be used during performance to control the synth engine in real time and can also transmit MIDI cc's from LayR's output port to other destinations.
Full IAA, Audiobus, Audio Unit and Link compatibility means LayR can be used with all hosts and other music apps on iOS and desktop DAWs.
Leave a Reply